Frequently Asked Questions

Shipping Time and Costs?

See shipping details HERE

How do I install my drawer system?

Install takes under 10 minutes. Since the truck bed drawers are pre-assembled and quality checked, there is minimal install required. With the assistance of others;

1. Lift the unit into the bed of your truck with the help of three other buddies, and slide the unit in about 60%, just past the wheel wells. 
2. With the desired mounting bolt hole beyond the wheel well, attach* the two 1/4" eye bolts (one on each side) with the provided 1/4" locknut. These bolt holes are located vertically on the side of the drawer system, nearest the cab of your truck. *Tools not provided
3. Fully slide the unit into the bed of the truck.
4. Attach the two turnbuckles onto the recently installed eyebolts in step 2. Attach these turnbuckles to your trucks tie down points near the cab of the truck. Additional D-rings may be needed depending on model of truck.
5. Tighten turnbuckles on each side.
6. Slide the four side wings, two per side, onto both sides of the unit by dropping the panels into their slots. Position these side wings with the cutouts to the outer sides.
7. All done, Rip er' baud!

Are the drawers water tight?

Yes, drawers are designed and built with rubber grommets on hardware and gasketing so it will be water tight. Full aluminum construction and stainless steel hardware so your drawer system will not rust from the rain.

What is your return policy?

Customer service is our main goal. If you have any issues within the unit we are happy to troubleshoot with you and help out any way we can.

See shipping details HERE